An instrument similar to the horizontal spiral, but different in that this exercise calls for greater involvement of the upper limb.
In addition to prone-supine positioning movements of the forearm on must, in fact, use arm movements that must guide the hand in the twisting movements. The aim of the task is to exercise the upper limb in a complex movement that calls for a good level of skill and fluid movements.
An instrument similar to the horizontal spiral, but different in that this exercise calls for greater involvement of the upper limb.
In addition to prone-supine positioning movements of the forearm on must, in fact, use arm movements that must guide the hand in the twisting movements. The aim of the task is to exercise the upper limb in a complex movement that calls for a good level of skill and fluid movements.
This is a modular panel that can be attached to the wall. The panel is designed to hold up to four exercise modules with a rectangular base.
No tool is required to re-position an individual module at a different height.
The module is inserted by sliding it into specific guides, and easily locked in place using a lever device.
The possibility of positioning the module higher up allows for adapting the exercise gradually and progressively according to the patient’s improvement. The structure is supplied with specific hardware.
This support structure makes it possible to vary the tilt on an individual work aid by 0° to 90° and can be adjusted to any intermediate position.
This makes it possible to extend the opportunities for executing the same exercise in terms of commitment and difficulty.
Also, it can used horizontal, with the patient sitting, or vertical with the patient standing up, by fitting the element to a configurable ERGO 100 panel while the patient is standing.
The structure is in painted metal, while the base is in anti-bacterial polyethylene that is water and UV ray resistant and easy to sterilise.
| Brand | |
|---|---|
| Weight | 2kg |
| Assembled dimensions LxWxH | 395 x 175 x 285mm |
This support structure makes it possible to vary the tilt on an individual work aid by 0° to 90° and can be adjusted to any intermediate position.
This makes it possible to extend the opportunities for executing the same exercise in terms of commitment and difficulty.
Also, it can used horizontal, with the patient sitting, or vertical with the patient standing up, by fitting the element to a configurable ERGO 100 panel while the patient is standing.
The structure is in painted metal, while the base is in anti-bacterial polyethylene that is water and UV ray resistant and easy to sterilise.
This is an advanced wall-mounted panel, set up for using a single work aid at a time.
The module is inserted by sliding in specific guides, and locked in place using a lever device.
The aid can now be easily adjusted in height without any tools or repositioning, making variations and progression possible when executing the same exercise.
The adjustment system is simple and does not require any force on the part of the therapist. The aid can therefore be adjusted between 54 and 200 cm, at 2.5 cm intervals.
The aid attachment also makes it possible to do the same exercise at a tilt of 0° to 90°, from vertical to horizontal.
The work module can be freely chosen from the libraries available.
The structure is in metal and is supplied with specific hardware.
This is a modular panel that can be attached to the wall. The panel is designed to hold up to four exercise modules with a rectangular base.
No tool is required to re-position an individual module at a different height.
The module is inserted by sliding it into specific guides, and easily locked in place using a lever device.
The possibility of positioning the module higher up allows for adapting the exercise gradually and progressively according to the patient’s improvement. The structure is supplied with specific hardware.
Made up of a window handle (180° rotation about a central pin) and door handle (90° rotation about a pin to one side).
Depending on how the aid is positioned on the wall panel, the latter can be used with the right or left hand.
The patient can practise performing a semi-circle or a full circle. The knob can be turned & makes it easier to be grasped either from above or from the side.
This aid can be placed on different surfaces and at a different distance, even on the knees of a seated patient, to help move the hand and wrist, as well as the elbow and shoulder.
Repeating the exercise provides remarkable benefits to recover mobility in the shoulder and shoulder blade even when affected by chronic periarthritis, arthrosis or rheumatoid arthritis, as well as in individuals with neurological deficiencies and muscular conditions.
For those who need to work on a sloping plane, it can be held on the knees or in the hands of a therapist, who is in front of the patient.
This is a modular panel that can be attached to the wall. The panel is designed to hold up to two exercise modules with a square base.
Similarly to ERGO 100, each individual module can be used at a different height and secured using a lever system.
The structure is supplied with specific hardware.
This aid is made to allow patients to exercise using “slalom” tasks between the pegs, following a sequence determined by the therapist on each occasion.
Precision and coordination of movements is required to keep the elastic cord taut and to guide it during the exercise. The ring facilitates holding it.
The unit has 5 plastic pegs.
One of these is used to hold the end of the elastic to be “guided” as indicated by the therapist.
This aid consists of two rectangular base modules with a rigid plastic tube that can be bent and shaped as desired. The tube ends can then be slotted into the bases.
The kit also includes a “goose bill” hook and a ring that can be guided along the path defined by the shaped tube.
This aid offers complete freedom in creating different movements and grips.
BodyWorx Adjustable Flat Incline Decline Utility Bench 
