No products in the cart.
General Exercise, Hand Exercise & Therapy, TEOREMA Project 
Compare
Teorema Project ELECTRICITY DOMESTIC ACTIVITIES
To activate the switch, the finger must be positioned on the correct half of the button. This task can also be done using two fingers.
To do a rhythmic alternating movement, selectivity is required in calling on the two fingers to flex in succession.
Inserting a plug in a socket is a task that calls for attention, coordination and evaluation of the force to do so safely. The patient must grip the two elements firmly in their hands and connect them to one another.
- General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project ELECTRICITY DOMESTIC ACTIVITIES
General Exercise, Hand Exercise & Therapy, TEOREMA ProjectTeorema Project ELECTRICITY DOMESTIC ACTIVITIES
To activate the switch, the finger must be positioned on the correct half of the button. This task can also be done using two fingers.
To do a rhythmic alternating movement, selectivity is required in calling on the two fingers to flex in succession.
Inserting a plug in a socket is a task that calls for attention, coordination and evaluation of the force to do so safely. The patient must grip the two elements firmly in their hands and connect them to one another.
SKU: CS-AR10016 - General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project ERGO 100 CONFIGURABLE PANEL
General Exercise, Hand Exercise & Therapy, TEOREMA ProjectTeorema Project ERGO 100 CONFIGURABLE PANEL
This is a modular panel that can be attached to the wall. The panel is designed to hold up to four exercise modules with a rectangular base.
No tool is required to re-position an individual module at a different height.
The module is inserted by sliding it into specific guides, and easily locked in place using a lever device.
The possibility of positioning the module higher up allows for adapting the exercise gradually and progressively according to the patient’s improvement. The structure is supplied with specific hardware.
SKU: CS-AR10003 - General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project TILT ERGO 1 STRUCTURE
This support structure makes it possible to vary the tilt on an individual work aid by 0° to 90° and can be adjusted to any intermediate position.
This makes it possible to extend the opportunities for executing the same exercise in terms of commitment and difficulty.
Also, it can used horizontal, with the patient sitting, or vertical with the patient standing up, by fitting the element to a configurable ERGO 100 panel while the patient is standing.
The structure is in painted metal, while the base is in anti-bacterial polyethylene that is water and UV ray resistant and easy to sterilise.
SKU: CS-AR10007
| Brand | |
|---|---|
| Weight | 1.3kg |
| Assembled Dimensions WxLxH | 395 x 175 x 85mm |
You may also like…
- General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project ERGO 400 ADVANCED WALL-MOUNTED PANEL
General Exercise, Hand Exercise & Therapy, TEOREMA ProjectTeorema Project ERGO 400 ADVANCED WALL-MOUNTED PANEL
This is an advanced wall-mounted panel, set up for using a single work aid at a time.
The module is inserted by sliding in specific guides, and locked in place using a lever device.
The aid can now be easily adjusted in height without any tools or repositioning, making variations and progression possible when executing the same exercise.
The adjustment system is simple and does not require any force on the part of the therapist. The aid can therefore be adjusted between 54 and 200 cm, at 2.5 cm intervals.
The aid attachment also makes it possible to do the same exercise at a tilt of 0° to 90°, from vertical to horizontal.
The work module can be freely chosen from the libraries available.
The structure is in metal and is supplied with specific hardware.
SKU: CS-AR10004 - General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project ERGO 100 CONFIGURABLE PANEL
General Exercise, Hand Exercise & Therapy, TEOREMA ProjectTeorema Project ERGO 100 CONFIGURABLE PANEL
This is a modular panel that can be attached to the wall. The panel is designed to hold up to four exercise modules with a rectangular base.
No tool is required to re-position an individual module at a different height.
The module is inserted by sliding it into specific guides, and easily locked in place using a lever device.
The possibility of positioning the module higher up allows for adapting the exercise gradually and progressively according to the patient’s improvement. The structure is supplied with specific hardware.
SKU: CS-AR10003 - General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project ERGO TABLE INDIVIDUAL WORK AID
General Exercise, Hand Exercise & Therapy, TEOREMA ProjectTeorema Project ERGO TABLE INDIVIDUAL WORK AID
Individual work aids can also be used while seated, by using this specific fold-away, wall-mounted table.
This service table blends in with any other vertical structures available, in terms of materials and aesthetic characteristics, and can be combined with one of them.
The structure is in painted metal, while the worktop is in anti-bacterial polyethylene that is water and UV ray resistant and easy to sterilise.
The worktop is also shaped to make it more ergonomic for cases of use by patients in wheelchairs. When not in use the service table can be folded away. It comes with specific hardware.
The ERGO TABLE occupational worktop is easy to fold away, to reduce its bulk when not in use.
SKU: CS-AR10006
Related products
- General Exercise, Hand Exercise & Therapy
Teorema Project CLIMBY MANIPULATION SKILLS
This innovative aid makes it possible to adjust the metal structure tilt. It helps improve coordination when using both upper limbs by gradually mobilising the shoulder, elbow and wrists while keeping hold of the bar with the hands. It can also be used by individuals with serious lack of strength and resistance. Using the bar, one limb helps the other. This exercise aid is a favourite among people with spasticity or hypotonicity, periarthritis, shoulder arthrosis or hemiparesis.
SKU: CS-AR10056 - General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project HORIZONTAL SPIRAL MANIPULATION SKILLS
General Exercise, Hand Exercise & Therapy, TEOREMA ProjectTeorema Project HORIZONTAL SPIRAL MANIPULATION SKILLS
This therapy aid exercises the subject in prono-supine positioning hand movements.
Specifically, the subject is asked to keep the ball between the first three fingers on the hand and guide it over the sinusoidal path. This exercise means that the large prono-supine positioning joints in the forearm are used to the maximum.
It is therefore useful to monitor the patient’s behaviour while executing this task.
Any incapacity to explore the maximum levels of supine positioning could be compensated for by bending the trunk on one side, while limitation of prone positioning will cause early and excessive movement of the arm away from the trunk.
SKU: CS-AR10008 - General Exercise, Hand Exercise & Therapy
Teorema Project BUCKLES CLOTHING
Good eye-hand coordination is required to insert the buckle. To tension the parts once inserted, a sub termino-lateral grip is used.
The palm face of the thumb’s pulp rests on the outer face of the first phalanx on the index finger. The muscles that stabilise the grip are the first dorsal interosseous, that acts on the index finger, the short flexor, the first palm interosseous and abductor of the thumb.This aid has a clip belt buckle on the one side that can be altered in length, and an end complete with zip that can be opened.
The clip belt buckle also requires good coordination and significant force has to be applied by the thumb, opposing the index finger to clip the fixing device in place.
SKU: CS-AR10021 - General Exercise, Hand Exercise & Therapy, TEOREMA Project
Teorema Project LADDER 10 MANIPULATION SKILLS
General Exercise, Hand Exercise & Therapy, TEOREMA ProjectTeorema Project LADDER 10 MANIPULATION SKILLS
The aid is positioned so that it reaches the furthest reach of the fingers, with the elbow extended.
Their centre of gravity is sufficiently in front of them to allow them to lift themselves up.
Positioning on a table: when put up on a horizontal surface in front of the patient, the active work required in using the ladder with the fingers will involve the proximal joints, extending the elbow and flexing the shoulder. In doing this progressive task using their fingers, the patient develops fluidity and coordination, alternating a flexing movement with one finger with the simultaneous extension of the other to reach the next step.
Positioning on a vertical panel: the ladder is positioned on the same axis as the support module, due to bulk considerations, and is rotated and used vertically. This is particularly useful when you wish to get the shoulder to a greater degree of flexing.
Positioning on a surface at a variable tilt: the exercise proposed can be useful for teaching the patient to align their trunk correctly, in order to achieve the change in position from seated to standing upright. Patient seated a little away from the table.
SKU: CS-AR10013
