NeuroTrac PelviTone

NeuroTrac PelviTone

Dual channel PelviTone device has all the features of Continence device, plus:

• Advanced multi-phase programmes where treatment is split into time phases with different stimulation parameters
• Stronger symmetrical stimulation with the reduced Pulse Width : 50 – 330 μS
• Three Custom programmes plus 11 Preset Continence programmes
• Lock mode function to measure the home compliance (mA and time used)
• NeuroTrac™ VeriProbe – The Vaginal probe for EMG and Electrostimulation

STIM

• Dual channel: individually isolated circuits
• Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA
• Type: Constant current, maximum output voltage 180 Volts +10 / -30 Volts
• Waveform: Symmetrical, rectangular bi-phasic with zero DC current
• Selectable pulse width: 50 μS – 330 μS [2% accuracy]
• Pulse Rate selection: in the continuous mode 2 – 100 Hz [2% accuracy]
• Time duration of the treatment selectable: 1 minute to 90 minutes
• Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second
• Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero
• Ramp up time 0.1 – 9.9 seconds
• If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on

NeuroTrac Pelvitone comes complete with:

• 1 x 9V Battery
• 1 Packet of 50mm x 50mm skin electrodes
• 2 Lead Wires
• Operating manual
• Soft carry case

***Sold separately : NEUPROBE – Vaginal Probe**

Environmental Conditions for use:
+5 to +40 degrees Centigrade. 0-90% Humidity

Environmental Conditions for storage & transport:
-25 to +70 degrees Centigrade. 0-90% Humidity