AusCo Sliding Top Tilt Table


  • 71cm Wide x 195cm Long
  • 1 Section, No Head Holes
  • 57 – 97 cm Height Range[optionally 520 – 770mm]
  • 200 kg Weight Capacity
  • 350kg Lifting Capacity
  • 155 mm Hoist Clearance
  • Retractable Castors
  • Hand Control
  • Adjustable angle twin foot plate
  • Set of 3 patient straps
  • Tilt angle indicators on both sides of table
  • Single leg support
  • Battery back-up
  • Choice of Upholstery Colour
  • Australian Made
  • TGA Listed


AusCo’s new Dynamic Tilt Table is available in a range of configurations to optimise patient care and outcomes. It is designed and manufactured in Australia with a 5 year warranty based on our popular Dual Action Tilt Table available since 1997.

Therapeutic Tilt Tables are primarily used in the acute phase of rehabilitation following trauma [eg Spinal Cord Injury or Traumatic Brain Injury], in ICU’s, for functional rehabilitation of handicapped or disabled patients and in cardiac assessments.

By using a twin column lift we are able to achieve a more powerful lifting function without lengthwise movement during height adjustment. As a bonus, we have been able to design a table structure which has fewer places where hands or limbs could be crushed.

It was developed to permit easy transfers to the tilt table independently, from a wheel chair, bed or with a hoist [there is 155mm clearance below the frame for hoist clearance]. Carers can adjust the working height to the best level for them [up to 970 or 770mm depending on the height range chosen] using the hand control.

The long cut-out in the leg area allows for individual strapping of the legs as required. A set of three patient straps is supplied as standard.

The table top tilts to 80deg and patients can safely walk on and off the table if appropriate taking advantage of the adjustable angle foot plate [ +/- 30deg in 5deg steps]. Two angle indicators, one on either side of the table, are also a standard accessory.

Lifting capacity is 350kg and tilting capacity is 200kg

Whether used in a Rehabilitation setting or at a patient’s bedside, the Dynamic Tilt Table can improve patient recovery rates while reducing risks to carers.

This is achieved through progressive partial weight bearing exercises using the sliding top on the tilt table which can significantly strengthen deconditioned lower extremities.
Repeated exercise on the Dynamic Tilt Table allows physical progress to be assessed in an objective manner.
For patients able to exercise only one leg, a leg support [standard inclusion] can be fitted to either side of the table

Patient handling causes many injuries to health care workers and the use of a Dynamic Tilt Table overcomes the need to move patients out of bed on to the floor for weight bearing exercise critical for their recovery.

Simply transfer the patient to the table, raise the backrest slightly for comfort and resistance, remove the insert, release the lock and your patient is ready to exercise with the level of resistance controlled by the angle of the table.

The AusCo Dynamic Tilt Table is built to handle patients weighing up to 350kgs.

Moving the table to a patient’s bedside reduces patient discomfort and the costs of transfers. The 125mm lockable castors make moving the table effortless.


Couch DimensionsMain Section1750mm long
Overall Length1950mm
Upholstery Angle adjustmentTiltTwin Electric actuators
UpholsteryFabricVinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
Foam38mm high density foam rolled over the edges of the strong plywood base covered with 12mm of soft foam for enhanced comfort while providing a full working width and extended life.
ColoursWedgewood. Other colours on request
FrameMaterialsHeavy steel plate and tube
ColourLight Grey
Wheel System125mm braked castors [155mm clearance for hoists]
Height adjustmentRange590 – 990mm [optionally 520 –  770mm]
Lift mechanismVertical lift with no lengthwise movement
Lift operationTwin Linak brand European electric columns
Carriage adjustmentRange350mm
FunctionTwin linear bearings with four runners
ControlHand control
Electrical RequirementsMedically approved to AS 3200 / EN60601 – 1
Operation24vDC max 70VA
Battery back-up
Lifting Capacity350kg Dynamic / 700kg Static
Tilting capacity200kg
Shipping Dimensions197 x 82 x 60cm / 95kg. Shrinkwrapped  on a wooden pallet
ARTG No123753
Warranty5 years, parts only