NeuroTrac Obstetric TENS


  • Decrease Pelvic Pain When in Labour
  • Dedicated Labour Pain Programme
  • Keypad With Bigger Buttons
  • Compact, Light and Reliable
  • Use With Remote Boost Switch for Additional Pain Control at Times of Intense Pain
  • No Known Side Effects for Mother or Baby


NeuroTrac Obstetric TENS

  • Decrease pelvic pain when in labour
  • Dedicated labour pain programme
  • Keypad with bigger buttons
  • Compact, light and reliable
  • Dual channel unit for simple and non-invasive method to decrease pelvic pain when in labour
  • Use with remote boost switch for additional pain control at times of intense pain
  • No known side effects for mother or baby
  • Clear bright backlight LCD allows the display to be read more easily in low light or dark conditions


  • Dual channel: individually isolated circuits
  • Amplitude: 0-90 mA into 500 Ohm load ; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA
  • Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
  • Waveform: Asymmetrical, rectangular bi-phasic with zero DC current
  • Pulse width: 220μS [2% accuracy]
  • Pulse Rate: 90Hz (Continuous mode) [2% accuracy]
  • Mode: Continuous (Boost mode)
  • Burst mode: Bursts of 9 pulses [200 μS] at 150 Hz, repeating twice every second (Rest mode)
  • Ramp up Time: 0.8 seconds from Rest to Boost
  • Time duration: continuous until switched off
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on
  • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero


NeuroTrac TENS Machine comes complete with:

  • 1 x 9V Battery
  • One Packet of 50mm x 50mm skin electrodes
  • Two Lead Wires
  • Operating manual
  • Soft carry case

NeuroTrac Obstetric TENS comes complete with:

  • 1 x 9V Battery
  • 1 x Packet of 50mm x 100mm skin electrodes
  • 2 Lead Wires
  • Operating manual
  • Soft carry case
  • 1 x Remote Switch

Environmental conditions for use:

+5 to +40degrees Centigrade. 15-90% Humidity

Environmental conditions for storage & transport:
-25 to +70 degrees Centigrade. 15-90% Humidity

SKU: NT-OT Categories: ,

Unit Size LxWxH

108 x 62 x 23mm

Unit Weight

0.1kg with battery